GOOD MORNING, I also used the head plug. v/o #6 and the return to the thermo housing. I put a ball valve at the head connection. keeps the hot water away from the heater during the summer.
bob

GOOD MORNING, I did a engine out rebuild on my M a couple of years ago. I don't remember the put together sequence, but I don't think it matters much, as long as it all fits. I have seen bellhousings on other engines that wont go over the flywheel once the flywheel is bolted up. I don't think that w...

GREAT PICS, THANKS FOR SHARING
BOB

YES I WAS A NYPD POLICE OFFICER FOR 30+ YEARS. AND BEFORE THAT I SERVED MY COUNTRY IN THE ARMY FOR TWO YEARS. WHAT HAVE YOU CONTRIBUTED TO OUR WAY OF LIFE?? OR ARE YOU JUST A NAME CALLER?? BATTERIES FAIL, AND THEY OFTEN DO IN THE MARINE ENVIRONMENT, IN ABOUT 3 YEARS +OR - SO WHEN THEY DOI BRING THEM...

+GOOD MORNING, I see the product called "FLEX SEAL" advertised on TV. Its a liquid rubber sealant rubber coating, I bet that might be worth a try, and I just will do that, when the weather warms up. As for batteries; I buy all my batteries, boat, cars and other equipment, from WALMART. The...

GOOD MORNING,
You can make up your own at any west marine store. They have various cables, you cut to length, and various ends that you can crimp on there at the store.
BOB

AT LEAST ONE PROGRESSION IS BEST, 45 THEN FINAL 70

GOOD MORNING, JOHN AT MIDWEST MIL HAS THE ORIGINAL. I JUST BOUGHT A SET FROM HIM.
BOB

GOOD MORNING, Not a m 37, but I bought it anyway. Got a little problem: I was running it along I- 81; and oil started leaking from a selector left side of the steering wheel, I believe it is the selector that locks up the front hubs, not that familiar with the truck yet. My questions: is it the sele...

GOOD MORNING, I just did a ring job on my M, due to "SANDY", I used alignment pins (2) in the bolt holes to set the head on straight. worked for me.
Good luck in finding the cause of your troubles
BOB

GOOD MORNING, I have been running a Bendix 24V fuel pump for four years now, no problems. I got it from Sam Wierner truck supply, in Ohio. I figure it cam off another military vehicle. GO FOR IT
BOB

LUBE THEM UP WITH DISH WASHING LIQUID OR SIMILAR AND WORK THEM IN, WORKED FOR ME
BOB

GOOD MORNING, I want to buy two m 37 doors from another member; but I dont have an economical way of getting them from Raleigh, NC to the NY area. If any member is making a trip north and would like to make some cash please let me know. My M got wet as a result of Sandy and the door bottoms are begi...

GOOD MORNING, Another member is selling a set of m 37 doors; they are in Raliegh, NC. I live in Breezy Point, NY 11697. I would like to buy the doors, as my M got wet with salt water durning SANDY and the doors are showing some rot along the lower edge. But I need them transported to the NY area, wh...

THANKS
I'll get to it this weekend. Shes been running good since the engine rebuild. THANKS AGAIN BOB