Thanks for the info! I'll look into other options then.

Not a simple bolt in, but all I had to do was drill two new holes in the support after mocking thins up to make sure the plunger would line up. Drilled the holes, took the two bolts from the old one bolt it on, bled the lines, and has been awesome since, residuals will go in once either a disc conve...

I know Raybestos makes a rebuild for the original single M/C. I might still have the box for it.

There's a reason I went to the dual M/C from speedway. Better braking power, and a corvette m/c rebuild kit will cover it.

Has anyone used the Lockright lockers that VPW is selling?

Yeah, I'm looking for light wheeling and such. I do need to relearn how to offroad with a stick though a bit.

Is there a set torque spec though?

I know, the hotrodder is showing....

Does anyone know the torque limits for the stock axles?

I might be able to work a deal out with my dad about a small block chevy that's mildly hotrodded to move from his Camaro to the M. Just want to know if I need to prep for a swap, or if they hold up to it.

So far,

Corvette style dual M/C for the brakes
35.5 bias ply Interco TSLs

I'll check, but there's 60yrs of road grime is probably covering it.

I was able to call the number posted on his site a little less than month ago and talked to the man himself. Very helpful and prompt service.

MM,

How,, what? I have a buddy in Wyoming with an older Landy. I have to say that they aren't even close.

I think you won this one.

I wish I did, most guys that find mine confuse it for a Willy's of some kind

There's an adjusting slot? I either over looked that or I'm in the same boat. I did mine by feel.

So I ended up with a felpro mounting gasket for chevy small blocks Part number at autozone is 70194.

Seems to be working so far.

I found it by pressing a piece of card stock over the mounting surface and matching up a gasket to the oil profile on the card.

Bert,

Do you know the inner and outer diameters, in case I need to cut one?

Thanks in advance if you do.

-Jim

So I'll check the Felpro one,

I would like to not have to buy an entire gasket set for one gasket.

-Jim