GOOD MORNING, I was checking fluid levels the other day and noticed the transmission oil was discolored. My M got wet during Sandy, I changed all the fluids right after, but I guess the transmission needs
another change. My question: how many quarts does the trany take??
THANKS BOB

GOOD MORNING,
I switched to the Petronix a couple of weeks ago, I agree its a whole different animal. Runs smoother and the starts are right on. Seems more responsive, I usually ran her at aront 40, now I get to 40 and she seems to want more. Very pleased and a easy install.
BOB

GOOD MORNING, Have you used a non contact thermometer to verify your dash reading? I would do that first then run it w/o a thermostat and do it again, see what you come up with. My M, w/o the thermostat runs about 100 deg.
BOB

GOOD MORNING,
I am a firm believer in not, not mixing oil, you put 6 quarts of one brand and weight in. I am using a detergent, 10w40 in my M, non detergent does not make sense to me, mybe in your transmission, but not the engine.
Just my 2 cents

CK OUT THE PETRONIX WEB SITE OR GIVE THEM A CALL, THEY WERE VERY HELPFULL, BUT I GOT THE CORRECT PART NUMBER FROM ONE OF OUR MEMBERS,
BOB

THANKS, While I had the dist out and the plate off I noticed that the fly weights were frozen, I hit them with kroll and then lubed up the entire system.
BOB

GOOD MORNING, I purchaced and received the petronix 161 electronic ignition for the distributor. Great purchace, easy install, pull the distributor, remove the base plate with the points and condensor, replace it with the petronix base plate, place the magnet ring on the distributor cam and re-insta...

THANKS VERY MUCH
BOB

GOOD MORNING, I agree, take the dist out; the toughest part in the removal and replacement is getting the hold down bolt out and in. I just contacted a company called Petronix: I am going to convert the dist to electronix. I"ll let you know what they have to say as soon as I give them my distri...

HI AGAIN, I have been in touch with Petronix, re: converting the distributor to electronix, they asked for the distributor number. Again THANKS BOB

THANKS, So if I wanted to order parts needed to convert the distributor to electronic; could I use either number??
thanks
BOB

GOOD MORNING, I need my distributor number number so I can buy parts to rebuild it. Is there a uniform number ? or does each distributor have its own number?? If there is a common number please leave it. If its individual numbered where can I find the number??
THANKS BOB

THANKS, THE OIL PRESSURE SWITCH CONNECTION WON'T GIVE AND I DONT WANT TO DAMAGE THE LINE THAT FEEDS IT.
I'LL SKIN THE CAT ANOTHER WAY. I'LL USE THE TOP LINE TO THE OIL FILTER WITH A "T" AGAIN THANKS
BOB

Good day, Its been along time since Sandy hit Breezy point and my M. She got wet, with salt water, up to the top of the tires. I re-ringed the pistons, did a valve job, freeded up the clutch plate, pressure plate., washed out the salt water, greased her and got her back on the road. Due to the salt ...

GOOD MORNING,
I would do a compression ck before I went any further; other than putting in new oil and filter. It tells a lot about the engine internals.