Why females should avoid a girls night out after they are married.... The other night I was invited out for a night with the 'girls'. I told my husband that I would be home by midnight, 'I promise!' Well, the hours passed and the margaritas went down way too easily. Around 3 am, a bit loaded, I head...

Gary that doesn't look to good. Are you sure its a stuck thermostat and not a air pocket in the motor. Sometimes if you add the coolant too fast it doesn't have time to get the air out through that hole in the thermostat. Just my 2 cents...

Sal

Wow.. Thanks Carter for removing that 4th strap. I was loosing sleep over it
Looking good guy....

Sal

Like 52M-42 I have never heard of a spacer or shim used between the stock fuel pump and block. But I did remember a post about the thickness of the gasket material used. Here is the link I hope it helps


http://www.g741.org/PHPBB/viewtopic.php ... l+pump+arm



Sal

ZG. Which ever gun you buy make sure it matched the CFM of your compressor. The CFM rating should be on the data plate of the compressor and on the gun. To give you some idea my compressor is rated at 8.6 cfm @40 psi and 6.4 cfm @ 90 psi . The 2 guns I use are Harbor Freight and there rated at 6 cfm...

LOL.... I felt the same way when I first read it, This is ME ! all except for #8 I haven't tried that yet. lol

Sal

AS I AGE, I REALIZE THAT: 1. I talk to myself, because sometimes I need expert advice. 2. Sometimes I roll my eyes out loud. 3. I don't need anger management. I need people to stop pissing me off. 4. My people skills are just fine. It's my tolerance of idiots that needs work. 5. The biggest lie I te...

Gary. What are you going to use the red loctite for ?

Sal

I used the same universal licence plate light that Gary used but mounted it on the license plate holder I made out of sheet metal and attached it under the drivers side tail light. By doing it this way all I had to run was a short jumper wire to one of the tail light connectors. (#21) The light is g...

Great Battery Spec. sheet. Thanks for posting it..

This might be some help to you in finding the right shock, its a list of mounting and length specifications for Monroe shocks.

http://www.monroe.com/assets/downloads/ ... hSheet.pdf


Sal

No.. You can use any 12 volt battery's that you may have.

Sal

Are both battery's dead or just one? You can jump it if one is bad by putting your jumpers across the bad one but if there both bad or missing your out of luck. I wouldn't connect a battery until you first check to make sure the pos. (+) isn't grounded or other wiring is shorted.

Sal

And if you use this code E40C9D3DB008DC when ordering from Rock Auto you can get 5% discount . Code expires 8/15/2015.


Sal

Wayne check your Email

Sal