Hi all

Just arrived back from Florida where I took the kids to Disney's Hollywood Studios.
Outside the Indiana Jones stunt show they had these parked up. Quite effective and unusual !

Cheers

We are due snow at the end of the week also Gary.
Luckily I will be in Florida for a couple of weeks and then back to the freezing conditions again

Will be fitting snowplow on my return.

Is this problem common to other trucks of this age or is it something unique to the Dodge?

thanks guys, will try the off-paved road trick the next time.

I know this has been mentioned before but is there a "trick" to taking the transfer box out of 4 wheel drive? Mine was stuck in 4x4 and I couldnt move the lever so I tried rocking the truck back and forth a bit but no luck so I drove down the road for about 3 miles and then I was able to s...

["M37UK"]Wayne, there is no need for the nut closest to the starter. I used 1 nut and star washers to hold it all secure. Stu the nut closest to the starter is needed to prevent the insulator from being damaged when you tighten down on the nut to secure the battery cable eyelets. Sal :mrg...

Wayne, there is no need for the nut closest to the starter.
I used 1 nut and star washers to hold it all secure.

Your truck is coming together nicely !


Cheers

How do I resize a pdf file and save the changes ? I currently have a 100 pg PDF file that is formatted for 8.5x11 inch printing. I want to save the file and upload it to a publishing website for A3 printing......8.5x5.5 inches. I downloaded a converter which re-sized it but, it wouldn't save the ch...

Wayne, how "heavy" is the wire from your alternator to the starter stud? It doesnt have to be a heavy gauge as all it is doing is charging your system. I use 4mm (11 AWG) cable for mine which is rated @ 60amps for 6.5feet. A good online calculator for cable sizing here: http://www.solar-wi...

Well, since none of my extra parts are selling, the following is going to the scrapyard on Mon: Front/rear fenders, bed panels, inner bed fender, super straight frame, axles, carb, misc brkts, etc. Too bad though. I've held onto this stuff for too long and tired of storing. If I was less than 5000 ...

Try Vintage Power Wagons, Last week I purchased what I would describe as a "perfect" carrier a complete setup for $275 look on page 89 of the body section, very impressed and pleased with this purchase http://www.vintagepowerwagons.com/pdf/parts/18body.pdf That sounds like a good deal Kei...

Let me add a little. If you indeed use the truck leave it off. I have one on mine and if it wasn't for me changing out the cab tub this summer it would already be in the bed laying on floor. I will be keeping it though for resale value if I ever sell the B1, along with the soft top frame. I have be...

Maybe the early M37s are different, but on my M37B1 there is no way the wiring could be disconnected in cab and pulled out to the engine bay. Where I am now is I have brought both right and left sides into the cab and removed. The harness is now installed in my rolling cab tub. In a few rain free d...

Sorry to butt in but does anyone know if you can still get these heater kits?

Cheers

Did anyone find out if GKN have these wheels as a stock item?
Would it be possible for one of you kind souls to enquire on my behalf?

I would be interested in importing them into the UK.

Cheers