Thanks warren I thought it might be a true 1"x2" in dimension. My bows are original and have sagged from age but not enough to replace

Good Morning Where can I find the dimensions for the wooden stringer which ties the 3 M37 bows together? Each bow has a U shaped bracket underneath. I read some where the material used was oak. thanks

Cant seem to keep spark plugs from fouling (carbon). New plugs, almost new rebuild on engine. Plugs are available from OReilly or NAPA or military vendors but only in one heat range. Appreciate some input thanks

Anyone have a spare 60 lb pressure sender with Douglass (metal) connector? thanks

Thanks to all responders. I found a GI EIS metal drum pressure bleeder. It had the adapter to screw into the master cylinder. It is quick. Fresh fluid thruout. Probably could use some attention to cylinders cause it sits too long, but I think I am good to go In the veterans parade at the Iowa State ...

I am getting a mix of fluid and air not sure where the air is coming from

I have been trying to bleed the brakes on my truck using the "pedal down bleeder open-close bleeder pedal up add more fluid to master cylinder, etc" I can not get the air out of the system. Any one have this problem or have some ideas? thanks

Did you get your top sold??

How about a mirror arm and mounting bracket. thanks

Anyone have a passenger side mirror arm/mount for sale? From prior posts, It's on the M37 CDN trucks thanks

Thanks for your help. Thought I might pull distibutor cap and mark rotor position to make sure it doesnt change when we re install pump

I have a fresh overhaul in my M37 230.CI. I have developed an oil leak (drip) which I thought was the pan gasket, but I now believe it is the oil pump where it bolts to the block. Is it possible to remove the pump to change a gasket without having to disturb the distributor which will require re tim...