This Page helped me a great deal when I was replacing the seals on mine.

https://www.t137.com/ClintDixon/Seals/Seals.htm

The can of Yellow I used said School Bus Yellow on it.

I believe this is what your looking for .
https://www.zoro.com/baldwin-filters-bu ... /G2353097/

When I replaced the brake lines on my Ram charger I was able to buy the Armor Springs from Amazon and make up my own lines. https://www.amazon.com/dp/B01IRQXDZC/ref=sspa_dk_detail_0?psc=1&pd_rd_i=B01IRQXDZC&pd_rd_w=Doh8o&pf_rd_p=5d846283-ed3e-4512-a744-a30f97c5d738&pd_rd_wg=FWKOF&...

I believe the numbers are Napa 3877 for the Inner and 3878 for the outer. If I remember correctly .

I had my Carb rebuilt by Treadwell a few years ago . They not only rebuilt it but they made adjustments and ran it on a test engine before sending it back to me. I had no problems with them and would use there services again.

Good Idea I'll try the grease NV. Thanks

I've been using A Wix 51100 filter right along and this is the first time I have seen seepage around the top of the Filter housing . I used the gasket that came with the filter it seemed a little thin at the time but never had trouble with it before. I was just wondering if anyone knew of a gasket t...

Does anyone have a part number for a thicker Oil Filter Housing Gasket. I'm having trouble with the thin one that comes with the Wix 51100 filter . I tighten down the cover and I'm still getting some seepage.

Still here reading and learning from NY.

This might be of some help. Its a list of seals and Sleeves.
https://www.t137.com/ClintDixon/Seals/Seals.htm

I used 2/0 welding cable on mine. Welding cable has many more smaller strands and is more flexible and carries more current. But the insulation is thinner then on your normal Battery cables.

I used Gillespie AJP Color from Army Jeep Parts and Reduced it with Xylene.

I believe I read over on Steel Soldier a while back that oak was used. I used Red Oak on mine only because I like the look of it .