Lowered price

I looked for 8 months and found nothing. I ended up buying mine from Midwest military, beautiful.

1954 Dodge M37 w/w. In original forestry yellow, last used as bush truck. Everything works. Upgraded to electric fuel pump and 2 barrel carb. Electronic ignition. Have original fuel pump and carb, easy to reverse. Installed turn signals with composite lights. Have original lights as well. Installed ...

I know this is a bit older of a post, but thought be good to reuse. I was looking into do a 60 swap as well, why not just weld a new spring perch on the dana 60, so you can just mount to the original springs ? I realize there may be about a 1 inch off set to one side, but with the fenders so big, it...

All my seats are in good structural wise, except need new covers. I'm just missing the whole passenger bottom. I saw the hog rings you were talking about nam, i was debating on how i wanted to do that since its still wood base, so can also staple.

Thank bruce, that helps a lot. I see you said you make one in plywood, and from what i knew all seat bottoms were plywood, where the originals not plywood ? I do have the actually locking part of the latch on the front of the seat, was trying to see how hook part that's on the top seat bottom was ho...

I've done a search, a lot guys talk about, but no up close pictures or diagrams. When I've come across a picture, its of the seat in place and finished from 3/4 feet away, or its the seat back/ driver seat. As for the gallery, its been down until just recently, and even then i haven't been able to f...

Like most m37s, when i got mine, the bottom passenger seat was gone. I of course looked around and talked to to others and found it was any wood board/sheet that fit to cover it. I have also seen that there was a latch on the front to help lock it down, but for the life of me, i can't find how it is...

It was done rather nicely and keept up apparently. Hey its used instead rotting and not horribly mangled.

But woooww on that price tag. I think your paying for the drugs in the seats as well.

Just like nam hinted on, i would first do a visial check if all wires are fully intact first. Remeber if the wire wasn't replaces, then its over 50 years old. Can also do a quick check if the douglas numbers are connected to the proper ones. No matter what people belive or say, military stuff is not...

Got the part going to rear, need the under dash harness CC1500368.

I did spray around carb with starter fluid for leaks, and nothing, guess ill try again. As for top dead, just to double check it, i used the bubble method. Used spark plug adapter attached to hose, ended in jar of atf/oil. Connected into #1 spark plug port. Turned fan by hand, turned until no bubble...

I have been fiddling with my engine, trying to get it to run properly. I thought i had it good, until i pulled it out to move another vehicle and it died 3 times, and took a while each time to get it to start. I have checked the TDC marks, and there correct, the oil pump is timed correctly. I have n...

Looking for a bed spare tire carrier bracket, or whole assembly with spinning wheel.

I am jealous on how beautiful your engine looks, some day i will make mine silver and black as well.