Sold my M37 some years ago. Cleaned out the shed, I have three vacuum wiper motors, original but ratty brass dash placards, and one tail light housing. Who wants? Bill

it is gsaxcess.gov but you have to have a code to access the site. i would assume they would show up on gsaauctions.com if they are not transferred to another agency through gsa-bill

i sold my m37 about 6 weeks ago but still get on the gsa website for work from time to time. there are 8 m37s in wyoming that are currently in screening. i would assume if they do not transfer to another government agency, they will move to an auction sight. just wanted to give you all a heads up th...

it is on the tree, 283 w/turbo 350. basic v8 but not something i will have to tweak constantly. few mechanical issues to work out but nothing major. i hate to jump from the m37 ship but i know my truck is going to a good home-bill

It sold yesterday on ebay. I also went to look at and made a deal on a 1955 chevy belair 2 door post. i looks good on the outside, run strong with a 283 but leave the interior as my project. My M37 went to a guy in Albuquerque, NM who is going to put it in the showroom of his Dodge dealership. Will ...

I am selling my 1963 M37 that I bought in 2003. I spent much time getting it into driving shape. I have it listed at ebay under item number 270610575497. I have included a complete (to my memory) listing of everything I did to it over the last several years. It is painted in Haze Gray epoxy instead ...

never mind, just checked and he has both listed on his website. thank you for the direction-bill

do you know if they are NEW or rebuilt? bill

current, good, part number for a new water pump? I have looked at cabell's breakdown and also one I got from the p15-d24 website. None of the ones I have given to napa have been good. mine is leaking and do not want to put a rebuild on it. thank you all for any help. bill

+1 to the POR 15 tank sealing system. I used it on my truck 8 years ago and have no problems at all since. to seal gaskets and screws you can use a product called 1428 B1/2. It is a two part fuel tank sealer for aircraft that fuel will not affect. i am using it on my tank to seal an area that was ru...

i also did this with my installation, that is, wired it to a switch to use as a primer. i also wired the whole shebang into a 12v(my truck is 12v) relay that is actuated by both the oil press switch and the momentary switch.
bill

charlie, i do not have a part number for you on the one i used. what i did was go to napa and looked at their "book". i got one that had an 1/8th inch pipe thread and two push on terminals. i think it was rated at 5 or 10 psi. any psi is okay as long as the switch CLOSES below your idle oi...

dont have a tip for a stock harness for you, sorry. i would make sure that you install an oil pressure switch in a tee with the oil pressure indicator and run it to a relay to run your fuel pump. this way if you are in a wreck that knocks you out, the fuel pump wont add fuel to a possible fire. that...

i think i have solved my problem. i plan to install an aircraft ADF receiver in my glovebox and a PA speaker under the dash(or some type of military speaker unit in view. the ADF receives AM signals and will look more military than a stock auto radio. thoughts?

bill

what are my options, if any, for installing a military radio in my M that will/can be made to run on 12volts and will receive AM signals and broadcast them over an interior speaker? I listen to AM radio and a nice mil unit in my truck would still look normal. Thank you in advance-bill