i dont find myself needing a t98 the stock tranny shifts well i guess im just used to it

HAHA i remember talking to you on the phone about this subject a couple years ago you sent me some info still havent had any luck

oh and also my flywheel is a industrial 8 bolt flange which came with my 8 bolt crank and it has both 10,10.5 and 11" PP bolt patterns on it so its kinda like a universal flywheel

iam also using the stock trans and a HD 10.5" clutch from AB linn, its a 10.5" disk and PP but sprung with much heavier clamping springs works great, i have 3 acme T98's but i cant find a PTO to fit so i will not sacrifice my winch for a syncro trans so if anybody has a CDN PTO laying arou...

hello everyone sorry i have not got back to everyone been busy, thanks for all the good positive comments, as far as perking up the 230 there are tons of aftermarket parts for them i would say raise the compression by shaving the head at least .060 then address intake and exhaust manifolds you could...

Hello everybody I need a reasonably detailed video of how I built my M37 and my 251 Chrysler engine hope you all enjoy thank you
https://youtu.be/PqEY8iqlPMc

I would absolutely run the stock 2 carb setup not the aluminum one it's going to run so much better having the intake bolted to the exsaust those intakes need heat to suspend the fuel in the intake correctly, goes against all normal auto performance mods but the flatheads like the intake heat, i hav...

Just wanted to see if there was anybody out there with a set of 4.89 in the chuck or out or used maybe cheaper than the $600 something that they are new, i'm building a primarily on the road truck but I was going to see if anybody had some that I could put in the front that will hardly ever be locke...

I have for sale a good 230 ci m37 engine all new gaskets and seals everything form bell housing to fan as seen in pic paint green and go 12v distributor not included call $750 obo 1-603-491-9593 Justin.

sold thank you!

I sold my 230 that i have advertised and the guy who bought it was a military vehicle nut like myself and we got to talking about CND trucks because I have a 251 in my truck and I told him I would like a spare engine just incase and he said "let me call you right back" so I got a call back...

Yes that's correct I'm in contoocook NH 10 minutes from concord

Hello I have a good 230 engine that I pulled out of my m37 less than a year ago because I put in a 251 instead, this engine runs excellent has a freshly refinished flywheel clutch and pressure and ring gear all perfect comes with bell housing newer water pump I did a 3 angle valve job about 6000 mil...

haha well I'm happy with my oil and air filter setup not going to change anything

my truck is all converted to 12 volt so fording is out of the question for this truck anyway the more money I put into the truck the less hardcore four wheeling I do I have a locker in the rear with high strength axles and it is really nice off road with more power but I don't do any crazy things wi...