Page 1 of 1

Brake shoe

Posted: Sun Jun 12, 2016 5:02 am
by richard 775472
Hi All, yesterday I toke the rear weels and drum off, I've notice that the right brake shoe(2) were smaler than the left one. Is this normal , are the front one the same lenght.

Re: Brake shoe

Posted: Sun Jun 12, 2016 8:09 am
by Tom P
Should have a "primary and secondary" shoe on each wheel.
One is longer(secondary) than the other.
The short shoe goes toward the front longer to the rear,
TGP

Re: Brake shoe

Posted: Sat Jun 18, 2016 10:47 am
by Kaegi
on M37s all 4 shoes should have the same length material. if someone relined them at some point they may have done a primary and secondary by mistake. that is pointless with fixed anchor brakes. cant hurt anything but stock should all be same length.

Re: Brake shoe

Posted: Sat Jun 18, 2016 2:31 pm
by MSeriesRebuild
We have new shoes for M37 in stock, or we can reline your core shoes. Buying new is the better deal unless you need a special lining thickness due to worn or turned drums. We can rivet on whatever you need.