Page 1 of 1
Hub/Spindle Nuts
Posted: Mon May 11, 2015 4:47 pm
by topellis
Can someone tell me if the civilian power wagon has the same spindle/hub nuts as the M37? Just looking to source something local instead of having to order and have shipped.
Thanks for any info or part number.
Mark
Re: Hub/Spindle Nuts
Posted: Mon May 11, 2015 6:59 pm
by PoW
All I've seen on either was the same octagon shaped jobs.
PoW
Re: Hub/Spindle Nuts
Posted: Tue May 12, 2015 10:55 am
by topellis
PoW,
Thanks for the feedback but do you have any idea if they are the same size? I realize today some nuts are spline and such but octagon shaped can be about anything... about any size. I just wondered if they were the same. I don't know enough about Civie Powerwagons to know if the hubs are the same or not.
Thanks,
Mark
Re: Hub/Spindle Nuts
Posted: Tue May 12, 2015 11:49 am
by Tom P
The WDX-WM300-W300M (flat fender) Power Wagon uses the same hub,nut,bearings.
The W series, power giant, (conventional) Power Wagon trucks might be different as they used a Dana type axle.
Not sure about those. Most parts stores will be looking at the W series not the WDX-WM300.
TGP
Re: Hub/Spindle Nuts
Posted: Tue May 12, 2015 6:11 pm
by topellis
Thanks! That's what I needed to know.
Mark