Page 1 of 2

M37 Update

Posted: Sat Oct 29, 2011 7:26 am
by WarrenD
Not sure if I've posted what I've been up to with my M37 since I got it on Sept 6, 2011 so here goes in no particular order:
Mechanical
Replace rear pinion seal
Replace dented rear driveshaft and u-joints
Replace rear output t-case seal
Fix leak from T-case drain plug
Replace radiator, belt and hoses
Install keyed electrical disconnect
Install missing passenger seat latch
re-cover passenger seat
Replace fuel gauge
Install radiator overflow tube (directs overflow down and away)
Install yellow headlights
Tighten T-case mount bolts (and many others!)

Body
Repair rust holes in cowl
Paint body below the windshield (3 cases of rattle cans so far!)
Repaint bridge plate

I know it's no good without pics, so:
M37 Oct 469.jpg
M37 Oct 469.jpg (86 KiB) Viewed 2670 times
M37 oct 474.jpg
M37 oct 474.jpg (90.94 KiB) Viewed 2670 times

Re: M37 Update

Posted: Sat Oct 29, 2011 3:31 pm
by majorhitt
Looks great. keep us posted

Re: M37 Update

Posted: Sat Oct 29, 2011 7:54 pm
by k8icu
Looking good keep up the great job!

Re: M37 Update

Posted: Mon Oct 31, 2011 2:29 am
by Cal_Gary
Nice work! I'll use those photos as a guide to clean up the edges of my front fenders!
Gary

Re: M37 Update

Posted: Mon Oct 31, 2011 4:28 am
by rixm37
looking really good !!

Re: M37 Update

Posted: Mon Oct 31, 2011 4:36 am
by T. Highway
Looks good, and I love those amber headlights.

Re: M37 Update

Posted: Tue Nov 01, 2011 9:56 am
by WarrenD
Cal_Gary wrote:Nice work! I'll use those photos as a guide to clean up the edges of my front fenders!
Gary
Thanks, that right front is NOS, virginal and doesn't get any cleaner. I've been told by the seller to take very good care of it or else!

Gary, if you need me to take photos or close-ups, let me know. You are always welcome to stop by and see it for yourself!!!

Re: M37 Update

Posted: Tue Nov 01, 2011 9:57 am
by WarrenD
Thanks all, sorry I didn't get back sooner, power has been out since midnight Sat and just came back on. That hot shower sounds soooo good!!!

Re: M37 Update

Posted: Thu Nov 03, 2011 5:39 am
by m37jarhead
Tell us all about the yellow strip on the hood. Looks pretty cool to me. I'm curious to know if was a miltiary thing
or yur idea. Makes the truck stand out. I like it. Let us know.
JB

Re: M37 Update

Posted: Thu Nov 03, 2011 8:54 am
by WarrenD
The yellow stripe indicates it's an 8th group truck from the Vietnam Era. The CO of the 8th was having trouble spotting his convoys from the air as they were often intermingled with other units and civilian traffic. One of his officers hit upon the idea of painting a yellow stripe on the nose of all the groups trucks, which they did. It worked. Not a Korean War thing, nor Guard units, strickly an 8th Group thing from Nam.

Re: M37 Update

Posted: Thu Nov 03, 2011 11:55 am
by k8icu
Your truck is missing a couple of things. White stars and bumper markings! :)

Re: M37 Update

Posted: Thu Nov 03, 2011 2:35 pm
by WarrenD
The bumper markings are now on, but the stars and hood numbers have to wait until the paint sets up, with these temps that will be a few months. I'm not going to rush it, even though the bumper paint was over 4 weeks, it was still a little soft.

Re: M37 Update

Posted: Fri Nov 04, 2011 3:52 am
by Cal_Gary
I appreciate the invite, Warren, but you're a bit far away. :)
Gary

Re: M37 Update

Posted: Sat Nov 05, 2011 7:55 am
by M37UK
Warren, which color is that you have used?

Cheers

Re: M37 Update

Posted: Sat Nov 05, 2011 10:58 am
by WarrenD
That is Randolph 24087/24084. It's the Vietnam Era 24087 (which I have been told changed resulting in the modern FS 24087 being lighter, yellowy and brownish compared to what it was in the 60's.) The modern match for 1960's 24087 is 24084. According to Randolph, they make the same color under both FS numbers, so I'm sure I have the correct color for Vietnam.
Be careful when looking at colors on the internet and/or taken by digital cameras. The white balance is hardly ever calibrated, and if it is, different light will render colors differently.
I got my paint from Pete DeBella Jeep Parts in NY, I think he may have an exclusive on the Randolph 24087 rattle cans.