Page 1 of 1
Differential companion flange torque
Posted: Sun May 22, 2011 12:10 pm
by Gerry
I cant find the torque value for the flanges on the front and rear Differentials. Finally got time to put drive shafts on but cant tighten the flanges without torquing
Thanks,
Re: Differential companion flange torque
Posted: Sun May 22, 2011 4:36 pm
by Frank Irons
I believe it is 250 ft lbs
Frank
Re: Differential companion flange torque
Posted: Sun May 22, 2011 5:09 pm
by Gerry
Thanks,
I thought the manual said 300 but that seemed like a lot so I wasnt sure if I was reading wrong.
Re: Differential companion flange torque
Posted: Mon May 23, 2011 4:55 am
by Frank Irons
Just checked my manual and you are correct, the torque should be a minimum of 300 ft. lbs. per TM9-8031. So much for my memory.
Frank
Re: Differential companion flange torque
Posted: Mon May 23, 2011 5:35 am
by Gerry
Frank,
Thanks for the info. It was confusing to me reading the manual since they have so many flanges.