Introduction and pictures
Posted: Mon Mar 04, 2024 9:32 am
I brought home a 1952 M37 a couple of days ago. I've not done much to it yet except to oil the cylinders (ATF) over the weekend and then turned it over this morning to make sure it wasn't siezed. I won't go into a lot of detail here, since I'm sure I'll have a lot of questions, but overall I think it's in decent shape for the amount I paid. There's very little rust and most of the parts are there.
It's missing the original front bumper, tailgate, and a few other small things. Most of the front wiring harness is missing (I have the cable from the generator to the regulator), and I have the regulator output connector (wires removed) along with the light switch connector (wires cut from that too). So, I'll be looking at buying or making a new harness.
I basically just wanted to get this out here and to see what you guys think. I have the dash plates with the exception of the main identification nameplate, but I did find a frame serial number (included in the pictures). No hood side markings I can see yet, but there are markings under the hood including one that appears to say ("TI JUNE 74"). Any idea what that might signify? On the front of the hood is a marking that says something like "RIGHT xxxxx TURNS".
I wanted to post pictures here, but I noticed the max file size is 256Kb, so I'm just including a few to get started.
I have several more high resolution pictures available in the link below:
https://drive.google.com/drive/folders/ ... drive_link
I'll try to find some manuals for it, since I'm not familiar with these beyond the reading I've done over the last couple of days. I especially need a good wiring diagram to get started, along with any suggestions of where to buy a front harness (they look pretty expensive) or to at least get the connectors I'll need.
I appreciate any feedback or suggestions you all might have.
It's missing the original front bumper, tailgate, and a few other small things. Most of the front wiring harness is missing (I have the cable from the generator to the regulator), and I have the regulator output connector (wires removed) along with the light switch connector (wires cut from that too). So, I'll be looking at buying or making a new harness.
I basically just wanted to get this out here and to see what you guys think. I have the dash plates with the exception of the main identification nameplate, but I did find a frame serial number (included in the pictures). No hood side markings I can see yet, but there are markings under the hood including one that appears to say ("TI JUNE 74"). Any idea what that might signify? On the front of the hood is a marking that says something like "RIGHT xxxxx TURNS".
I wanted to post pictures here, but I noticed the max file size is 256Kb, so I'm just including a few to get started.
- IMG_7789.jpg (243.21 KiB) Viewed 559 times
- IMG_7790.jpg (242.02 KiB) Viewed 559 times
- IMG_7777.jpg (245.75 KiB) Viewed 559 times
I have several more high resolution pictures available in the link below:
https://drive.google.com/drive/folders/ ... drive_link
I'll try to find some manuals for it, since I'm not familiar with these beyond the reading I've done over the last couple of days. I especially need a good wiring diagram to get started, along with any suggestions of where to buy a front harness (they look pretty expensive) or to at least get the connectors I'll need.
I appreciate any feedback or suggestions you all might have.
