Page 1 of 1
Tcase yoke flanges for 1410 ujoints
Posted: Wed Sep 13, 2023 11:45 am
by mike_m
Does anyone know what the spicer pn is for yokes that will accept 1410 ujounts for the NP200 TCASE? Besides my M37 I also have a 1968 dodge w200 and looking to replace my driveshafts and yokes with modern available stuff as my existing stuff is obsolete and getting hard to find.My power wagon tcase NP201 is similar to m37
Appreciate any info.
Thanks
MikeM
Re: Tcase yoke flanges for 1410 ujoints
Posted: Wed Sep 13, 2023 6:04 pm
by ashyers
mike_m,
I'm curious to see if anyone chimes in. I've had issues with new joints not fitting the flanges well (undersized) and the bearings start walking after some miles.
You may contact Dave at
www.jobrated.com and see if he can help. He knows the drivelines in these trucks well.
Andy
Re: Tcase yoke flanges for 1410 ujoints
Posted: Wed Sep 13, 2023 6:28 pm
by mike_m
Thanks Andy for the suggestion. I have dealt with Dave before so maybe he could help. I can get the flanges from torque king, but they r pricey and don't provide the spicer number. I have reached out to others whi have done this and I'll see if they reply.
Re: Tcase yoke flanges for 1410 ujoints
Posted: Thu Sep 14, 2023 3:44 am
by Cal_Gary
Vintage Power Wagons might have some guidance as well. My M37 had Power Wagon yokes when I bought it. Still running them but need to add speedy-sleeves.
Gary
Re: Tcase yoke flanges for 1410 ujoints
Posted: Thu Sep 14, 2023 6:06 pm
by mike_m
Thank you Gary. That's a good suggestion. I suspect that might have it as well, but probably under their number and pricey. I think I have the yokes figured out for tcase and might by one to verify if I don't get any responses.
MikeM
Re: Tcase yoke flanges for 1410 ujoints
Posted: Fri Sep 15, 2023 4:36 am
by ashyers
mike_m,
You may try Adams Driveshaft too.
https://www.adamsdriveshaftoffroad.com/
I had them build a driveshaft for another project and they do really nice work at a good price. They were also quite fast! What more can you ask?
Andy
Re: Tcase yoke flanges for 1410 ujoints
Posted: Sun Sep 17, 2023 2:09 pm
by mike_m
Thanks for the suggestion Andy