Page 1 of 1
Pioneer rack mounting
Posted: Tue Jun 17, 2008 8:47 am
by dman
Does anyone have a link to a picture of how the straps are properly tied down. I have looked at several pictures and they are all a little different. I don't want anything to fall off while driving.
Posted: Tue Jun 17, 2008 9:06 am
by Lifer
If you don't plan on actually using the tools, you can do what some of the other guys do and secure them with nylon cable ties which are then hidden by the webbing straps.
Posted: Tue Jun 17, 2008 11:54 am
by Cal_Gary
David Ahl's M37 Restoration Guide has a nice shot....
Gary
3 Tools, 3 Straps
Posted: Tue Jun 17, 2008 3:18 pm
by m-37Bruce
Is what most folks say, if you notice, I've used 4.......my bad, huh? Also the zip-ties are present.
(BTW, the extra strap is near the shovel handle, only supposed to be one on the Mattock handle/point.)
Posted: Tue Jun 17, 2008 6:24 pm
by 52m37Hal
http://news.webshots.com/photo/27714769 ... 7451pStyGl
Her is another shot from Carter's webshots. The rule is one strap for each tool. So, in this pic the center strap should only be around the axe handle.
Hal
Straps for Pioneer Tools
Posted: Tue Jun 17, 2008 8:04 pm
by overton
Posted: Wed Jun 18, 2008 3:35 am
by knattrass
Nice job - we have started looking for the tools with the natural wood handles... so far no luck.
Posted: Wed Jun 18, 2008 6:48 am
by Joe L
Try Lehman's Hardware on line for natural wood handle tools. They're out of Kidron, Ohio.
