Page 1 of 1

Idle Speed vs. Mixture Screws

Posted: Thu Nov 03, 2016 1:46 pm
by NCM
Engine gurus:

I was hoping someone could help clarify a discrepancy in the maintenance manual. Figures 70 and 102 have opposite arrows pointing to the idle speed and mixture screws. Which one is which?

Thanks in advance,

David

Re: Idle Speed vs. Mixture Screws

Posted: Thu Nov 03, 2016 2:03 pm
by just me
Mixture is in the base of the carb and is a needle. Idle speed is external to the carb and pushes against the throttle lever.