Page 1 of 1
Differences in the NP200 vs NP201?
Posted: Thu Sep 22, 2016 3:15 pm
by 06boblee
Is the gasket and seal kit the same for both? I bought a set and it is for the 201, will it work on my 200?
Re: Differences in the NP200 vs NP201?
Posted: Fri Sep 23, 2016 3:49 pm
by Jess
I can't answer for sure but I thought the 201 had a pto port on it. Contact DC Trucks, as he will know and does carry parts for most of our stuff.
Re: Differences in the NP200 vs NP201?
Posted: Fri Sep 23, 2016 4:44 pm
by Elwood
The NP201 also differs from the NP200 in the use of a "knock" gear (a cushioned gear that apparently chews up its internal springs resulting in a knocking sound) and rear axle output through a direct drive instead of through the idler gear. But I think the gasket sets should interchange, except, obviously, for the PTO opening if the NP201 has it.
Re: Differences in the NP200 vs NP201?
Posted: Fri Sep 23, 2016 7:37 pm
by 06boblee
I got my kit from DC trucks, and it does not have a PTO gasket. I bought this a couple of years ago and am just now needing to use it- I wrote 201 on it , maybe I was wrong.