Page 1 of 1
Instrument Panel Circuit Breaker
Posted: Sat Jul 30, 2016 4:09 pm
by Elwood
The early G-741 trucks had a 15amp breaker between the ignition switch and the spider harness for the gages. I think it mounted on the back side of the instrument panel, but I'm not sure exactly where or how it was mounted. Anyone have or can point me to a photo? Thanks!
Re: Instrument Panel Circuit Breaker
Posted: Sat Jul 30, 2016 5:31 pm
by Tom P
From memory here, it mounted behind the gauge cluster on the left side
At the edge between the two gauges.
(Batt,/Temp)
Screw through the cluster.
Sorry no picture but is in TM 9-8030
Tom
Re: Instrument Panel Circuit Breaker
Posted: Sat Jul 30, 2016 5:46 pm
by Elwood
Thanks, Tom. I found a pic (Fig. 144) in TM9-8030. I had been looking in the later version (TM 9-2320-212-20) and didn't see any reference to it.