Lu4 winch part numbers help
Posted: Sat Feb 27, 2016 2:53 pm
Looking for normal seal part numbers for lu4 winch
Page 1 of 1
Re: Lu4 winch part numbers help
Posted: Sat Feb 27, 2016 8:18 pm
I can dig them up later sunday. I have a full set in my 'project to be started' container.
Re: Lu4 winch part numbers help
Posted: Sat Feb 27, 2016 9:36 pm
Nice let me know
Thanks
Thanks
Re: Lu4 winch part numbers help
Posted: Sun Feb 28, 2016 2:33 pm
1xCR-44968
1xCR-24986
1xSKF 7443
2xSKF 9997
BEARINGS
2X23256 CUPS
2X23100 BEARINGS
1xCR-24986
1xSKF 7443
2xSKF 9997
BEARINGS
2X23256 CUPS
2X23100 BEARINGS
Re: Lu4 winch part numbers help
Posted: Sun Feb 28, 2016 4:25 pm
I spent a bit of time with the guy a the seal store. I dressed up all the sealing surfaces and brought the components with me the parts guy took the measurements and we came up with this combination of seals:
fluidseal.inc
1x so250003500-438ta2 ss.2500x3.500x0.438 s.seal-nbr/c.steel type TA2-c
2x s052072080tc ss.52.00x72.00x8. s.seal-nbr/c.steel type TC
1x g53x2732 ss 4.437x5.500x0.5 klozure ring type 53
the large Klozure Kevlar seal for the drum was almost $50.
but with the amount of misalignment noticed on the winch when off camber or bumper hung warranted the diaphragm style seal with stainless steel fingers over the conventional doughnut spring seal
fluidseal.inc
1x so250003500-438ta2 ss.2500x3.500x0.438 s.seal-nbr/c.steel type TA2-c
2x s052072080tc ss.52.00x72.00x8. s.seal-nbr/c.steel type TC
1x g53x2732 ss 4.437x5.500x0.5 klozure ring type 53
the large Klozure Kevlar seal for the drum was almost $50.
but with the amount of misalignment noticed on the winch when off camber or bumper hung warranted the diaphragm style seal with stainless steel fingers over the conventional doughnut spring sealRe: Lu4 winch part numbers help
Posted: Mon Feb 29, 2016 9:33 pm
Thanks 1000 for your great help