Page 1 of 1
Brake Bleeder Adapter
Posted: Fri Sep 11, 2015 2:26 pm
by pwrwagonfire
Gentlemen,
I just picked up a nice older model pressure bleeder at a yard sale. I'd like to use it on my M-37...
Does anybody know where I can get the correct MC adapter?
Is there a part number I can order?
-T
Re: Brake Bleeder Adapter
Posted: Fri Sep 11, 2015 3:53 pm
by ZGjethro
I have a newer replacement master cylinder on my truck, and I think the top was vented. I screwed an adaptor into that vent fitting hole and used my Motive power bleeder. It worked really well. I have about 5' of tubing on the fittings so I can have the power bleeder in the cab and have it reach the footboard location of the master cylinder
Re: Brake Bleeder Adapter
Posted: Fri Sep 11, 2015 9:50 pm
by Cal_Gary
Ditto-I fabbed up a fitting to an old MC plug:
Gary
Re: Brake Bleeder Adapter
Posted: Sun Sep 13, 2015 4:32 pm
by pwrwagonfire
Thanks for the replies guys!
I was hoping that there might be an adapter with the same pipe thread somebody stumbled across.
I will see what I can rig up along the lines of the photograph below.
-T
Re: Brake Bleeder Adapter
Posted: Tue Sep 22, 2015 4:34 pm
by rickv100
i have fabricated an adapter using a pipe thread adapter. I think it is 3/4" with a 1/4" hole then a 1/4" hose barb.
Rick
Re: Brake Bleeder Adapter
Posted: Wed Sep 23, 2015 3:53 am
by pwrwagonfire
rickv100 wrote:i have fabricated an adapter using a pipe thread adapter. I think it is 3/4" with a 1/4" hole then a 1/4" hose barb.
Rick
Exactly what I needed! Thanks!
-T