Page 1 of 1
Another small jump seat question
Posted: Tue Aug 25, 2015 5:37 am
by Gerry
Is there supposed to be anything to stop the jump seat from hitting the bed when in the stowed position. Seams like the bolts will rub and dent the bed front. If so I guess a small piece of rubber will stop it.
Thanks,
Re: Another small jump seat question
Posted: Tue Aug 25, 2015 9:42 pm
by Cal_Gary
Nothing that I'm aware of. If you will PM me an email address I can send you a picture of a front bed panel in place with the jump seat removed, that shows nothing resembling a bump-stop,etc. on the panel.
Gary
Re: Another small jump seat question
Posted: Wed Aug 26, 2015 4:11 am
by Carter
Of all the M37s I have seen or owned none had such a thing.
Re: Another small jump seat question
Posted: Wed Aug 26, 2015 4:11 am
by 52 M-42
You can always add a few washers (a rubber one provides some drag) or bend the tabs on the clevises to create a little resistance so the seat doesn't swing so freely but can still be easily moved into position when needed.
The spare tire usually keeps the seat from banging around too.
Re: Another small jump seat question
Posted: Wed Aug 26, 2015 9:21 am
by Gerry
Thanks guys. Kinda figured they just left it that way but wanted to check.