g741.org

Looking for a transfer case shifter or two.

Im putting together a twin stick setup with a late model NP205 and from the look of this picture it should work perfectly.

If you have one or more please post pictures of what you have and pm me how much you would like for the parts.

You can buy the transfer case shift levers from Vintage Power Wagon. They are in their online parts catalog.

Just thought it might save you some time......

its not a m37 t case shifter...So back to the drawing board.

I am 99% sure that is a NP 205 shifter the large hole is a shouldered bolt and the small hole is for the shifter rod... I am pretty sure the np205 shifter is the one you are looking for..

ed

I have these two that are from a 70's chevy truck with a np205... notice the differences ?

I need one like this as the rod end needs to go straight back to connect to the np205 shift rod.

Master Yota is still here now and again. Its winter up in his part of the world and he may not being doing much truck stuff right now. When he looks at this, he may be able to tell you what the lever was from, if not M37 as he did a power swap into his M37CDN which is documented elsewhere on this site.

Jess

I saw some used T-Case shifters on eBay the other day....
Gary

Right here:
http://www.ebay.com/itm/M37-Dodge-milit ... d9&vxp=mtr

I received a reply from a pm I sent to Master Yota and he says the shifter is from a chevy, ford, IH truck and maybe divorced...But thats not logical to me as it has a large pivot like the married to sm465 ones I have, it seems to me it would be a long rod type if it were from a divorced transfer case..

Ill keep looking on ebay and such for this type of shifter..

Thanks for your help everyone.