Page 1 of 1
265 c.i. 1954 Chrysler Windsor 6 cylinder engine.
Posted: Sun Nov 09, 2014 7:12 am
by JimC
Has anyone installed one in an M37 ?
264.5 c.i.
119 hp with 7.0:1 pistons.
Re: 265 c.i. 1954 Chrysler Windsor 6 cylinder engine.
Posted: Sun Nov 09, 2014 9:54 am
by Jess
I think RMS or one of his buddies had one installed. You might look in the Build section for his posts about it. RMS should chime in here and post the details.
Jess
Re: 265 c.i. 1954 Chrysler Windsor 6 cylinder engine.
Posted: Sun Nov 09, 2014 10:10 pm
by RMS
JimC wrote:264.5 c.i.
119 hp with 7.0:1 pistons.
And that's with one carb
265's sitting in the frame, idles down more than the 251. i had her quietly spinning @ 450 were as the 251 starts to sputter and hunt below 600rpm. the 251 starts lugging out with violent shuddering under load around 750 before it flashes out or you pic a lower gear. im hoping the 265 canadian will be more luggable with that extra stroke.
build thread :
http://www.g741.org/PHPBB/viewtopic.php ... &hilit=265
265 ramblings
http://www.g741.org/PHPBB/viewtopic.php ... &hilit=265
http://www.g741.org/PHPBB/viewtopic.php ... 265#p40362
