m37 pto gears
Posted: Sat Nov 23, 2013 9:53 am
i have a 54 m37 would the transmission pto gears be strait or at an angle.
You mean the direction the teeth are cut where they engage each other ?
Page 1 of 1
Re: m37 pto gears
Posted: Sat Nov 23, 2013 3:08 pm
You mean the direction the teeth are cut where they engage each other ?
Re: m37 pto gears
Posted: Sat Nov 23, 2013 3:45 pm
yes i didnt know how to ask. sorry. thanks for any help you can give.
Re: m37 pto gears
Posted: Sat Nov 23, 2013 7:43 pm
Re: m37 pto gears
Posted: Sun Nov 24, 2013 1:07 am
There helico(angle) that mesh with the trans. gear.
The straight cut gear mesh with the cluster gear in the pto housing.
TGP
The straight cut gear mesh with the cluster gear in the pto housing.
TGP