Page 1 of 1
How do you change the windshild glass in the M37?
Posted: Wed Mar 26, 2008 5:59 pm
by philin mt
I have removed the 2 interframes from the main frame and removed the wiper motor and the 2 bolts and nuts in the unper couners. I can not get anything to move or wigle, do want to get riugh with it. There is not a lot of rust it just seams to be stuck any tricks ? thanks Phil
Re: How do you change the windshild glass in the M37?
Posted: Wed Mar 26, 2008 6:31 pm
by MSeriesRebuild
philin mt wrote:I have removed the 2 interframes from the main frame and removed the wiper motor and the 2 bolts and nuts in the unper couners. I can not get anything to move or wigle, do want to get riugh with it. There is not a lot of rust it just seams to be stuck any tricks ? thanks Phil
You are on the right track, the top piece of the frame slides off at the corners, the glass is then free to slide up & out of the frame. Rust just has it stuck most likely. If you are changing the glass anyway, the easiest solution is to break it & then remove the pieces that are left along with the weatherseal. Thoroughly clean & paint the frame, install a new weatherseal & glass.
Posted: Wed Mar 26, 2008 7:05 pm
by philin mt
Ok I will oil up my hammer, thanks Phil
