g741.org

My truck is missing the small link that connects the clutch pedal return spring to the pin on the linkage. Does anyone know how long it is? This is a piece of metal that fits over the pin and has a smaller hole in the other end for the end of the spring to fit through. We made one yesterday but I think it will take a 20 ton bottle jack to stretch the spring enough to get the spring hooked on it. Ours is about an inch from the center of each hole.

You find a answer to this yet???

No but I got your PM.

crap, did I miss your call?

Mine is 1 1/4" from hole center to center.

Just because you are a fellow Two M-37 and tool trailer owner...............I do this.

You are a gentleman and a scholar. Much appreciated! I did not have a chance to contact you do to mass confusion at work, which happens most everyday.

refit1701 wrote:You are a gentleman and a scholar. Much appreciated! I did not have a chance to contact you do to mass confusion at work, which happens most everyday.

After what ive been through over the weekend.........I would have taken my work confusion any time this week...............Not a problem, glad to help out.

With that extra 1/4" maybe you only need a 10 ton jack

That spring is strong! The link we made is real close to the size of yours and when we initially tried to get the spring on, it seemed like we were trying to move the entire truck. So some ingenuity will be required and a prayer that we don't have to take it loose ever again.