M-37 Carburetor Governor Adjustment Wrench
Posted: Sat Aug 17, 2013 12:24 pm
I have reproduced the Carter Carburetor Governor Adjustment Wench (41-W-3734). This is the wrench you need to adjust the max speed of your truck and eliminate "surging" and "flat spots" in the accelerator as described in the Carburetor Manual, TM9-1826A, pg 172 ff.
The wrench I reproduced is the "improved model" which does not require a second wrench to operate.
I've attached pictures below. The last 2 pictures show an original wrench next to my reproduction wrench.
If you are interested, they are $45 and shipping is free to the lower 48 states. Alaska and Hawaii will be actual shipping costs.
Please PM me if interested.
The wrench I reproduced is the "improved model" which does not require a second wrench to operate.
I've attached pictures below. The last 2 pictures show an original wrench next to my reproduction wrench.
If you are interested, they are $45 and shipping is free to the lower 48 states. Alaska and Hawaii will be actual shipping costs.
Please PM me if interested.
