Page 1 of 1

SIDE BOARD KIT AND COVER NEEDED!

Posted: Thu Jun 06, 2013 6:46 am
by Tim Powell
Hey Crew.
Where do I start looking for the side boards, top bows and cover for the back of my Lori's 1952 M-37?
HELP!
Image

Re: SIDE BOARD KIT AND COVER NEEDED!

Posted: Thu Jun 06, 2013 4:40 pm
by 52 M-42
You should go check out all the "usual suspects", Tim.

Snake River has most of the parts I believe at reasonable prices. John at Midwest Military also might have some or all of the metal parts you'll need. Vintage Power Wagon might be another place to try.

The swap meet thread here would probably be best and there is always the Steel Soldiers website too.

I don't have any extra metal parts for the bows and sides, or you could have them.

The wood you just make yourself with a table saw, router and sander (don't even really need the router, but it makes the edges nicer).

You should really try to use white oak like the originals, but it ain't cheap.

Good luck with your project, and don't forget the pictures!

52 M-42

Re: SIDE BOARD KIT AND COVER NEEDED!

Posted: Fri Jun 07, 2013 3:40 am
by Carter
Army Surplus Warehouse has lazyback steel post sets Tim. I bought a set from them years ago, removed the old wood pieces, blasted, painted and they looked like new.

http://www.armysurpluswarehouse.com/mil ... k-set.html

I have a set of top bows for a trailer that will fit an M37 but lack provisions for the straps that allow the cargo cover to be rolled up and secured. PM me if interested and I'll shoot some pics and price to you.

Re: SIDE BOARD KIT AND COVER NEEDED!

Posted: Fri Jun 07, 2013 3:56 pm
by w30bob
Carter,

ArmySurplusWarehouse has some interesting things.....but they're shipping charges are outrageous. I intend to call them to ask why, but I put together what would be a small box of parts on their order form and it says it's $80 to ship it UPS Ground. Nothing heavy either. So I'd like to get some stuff from them.....but I feel I'm getting ripped of on the shipping.

regards,
bob

Re: SIDE BOARD KIT AND COVER NEEDED!

Posted: Fri Jun 07, 2013 8:27 pm
by rickv100
Midwest Military is making repro bow corners for the m37. They also carry the lazy back and seat parts.
I went with white oak planks for my Dodge. I bought rough planks and planed them to desired thickness. Ripped to width on a table saw and rounded edges over with a router bit.

Re: SIDE BOARD KIT AND COVER NEEDED!

Posted: Sat Jun 08, 2013 6:25 am
by Carter
w30bob wrote:Carter,

ArmySurplusWarehouse has some interesting things.....but they're shipping charges are outrageous. I intend to call them to ask why, but I put together what would be a small box of parts on their order form and it says it's $80 to ship it UPS Ground. Nothing heavy either. So I'd like to get some stuff from them.....but I feel I'm getting ripped of on the shipping.

regards,
bob
I guess shipping rates have changed since I ordered a generator control box 3 years ago. It cost $50, weighed 5 # shipping was only $15. Calling them is a good idea Bob, that $80 must be a mistake, I would ask about sending them a UPS prepaid shipping label.

Re: SIDE BOARD KIT AND COVER NEEDED!

Posted: Tue Jun 11, 2013 7:03 am
by Tim Powell
Thanks Guys!!
I'll take all this info into consideration. I also will be posting a question about my tail lamps!
Has anyone heard from Bill Lamers lately??????

Re: SIDE BOARD KIT AND COVER NEEDED!

Posted: Thu Jun 13, 2013 7:27 pm
by Snake River 4x4
If you have concerns with Army Surplus Warehouse shipping. Call and talk to Jak, he is a real good guy to deal with, and he is the one that is the foreman for the catalog shipping.

Re: SIDE BOARD KIT AND COVER NEEDED!

Posted: Sat Jun 15, 2013 5:08 am
by w30bob
Thanks Tom.....I'll make sure to talk to Jak when I call. Might be a week or two....I ended up spending my M37 allowance on some other parts online. But I'll get to Jak.

Thanks for the info,
bob

Re: SIDE BOARD KIT AND COVER NEEDED!

Posted: Tue Jun 18, 2013 1:23 pm
by Tim Powell
I thank you all as well! Most excellent intel!