Page 1 of 1

Funky Fuel Pump Bolts Needed.....

Posted: Mon Dec 17, 2012 2:32 pm
by w30bob
Hi Guys,

Well......another thing I didn't know (because my M didn't have it's original fuel pump on it when I bought it) was that the correct fuel pump was held on with those 2 funky looking extended shoulder bolts (see pic below). So.....if anyone has any extras of these can you sell me a set or two (now that I purchased my second M I'm eating for two, so to speak). My zip is 20634, so if you have 'em and are willing to part with them...........just PM me with the total cost including shipping and we'll go from there. :D

thanks,
bob
Tuko wrote:Image

Re: Funky Fuel Pump Bolts Needed.....

Posted: Mon Dec 17, 2012 5:49 pm
by T. Highway
Bob,

John Bizal had take off bolts when I talked to him. Midwest Military.

Bert

Re: Funky Fuel Pump Bolts Needed.....

Posted: Thu Dec 20, 2012 12:43 pm
by xm708
I have a pump on epay right now with bolts and if it does not sell I will sell you just the bolts ..

ed

Re: Funky Fuel Pump Bolts Needed.....

Posted: Thu Dec 20, 2012 1:35 pm
by 52 M-42
Also try Charles at M Series Rebuild. He has take off stuff too.

52 M-42

Re: Funky Fuel Pump Bolts Needed.....

Posted: Thu Dec 20, 2012 2:26 pm
by m-37Bruce
Your pump looks stock to me, but the shoulder bolts are new to me? I really have no reference as my engine is 10 years older (1942/43) WC engine with different carb and pump.

Re: Funky Fuel Pump Bolts Needed.....

Posted: Sun Dec 23, 2012 4:57 am
by powerwagontim
Hi Bruce,
The extended bolts are proper. They make installing the pump a breeze!
Tim

Re: Funky Fuel Pump Bolts Needed.....

Posted: Sun Dec 23, 2012 11:54 am
by m-37Bruce
That would explain my exhaustive install, I guess I need to find a set of these?
Anybody have a source for these?

Re: Funky Fuel Pump Bolts Needed.....

Posted: Mon Dec 24, 2012 5:06 am
by T. Highway
Bruce,

Like I posted earlier, John Bizal @ Midwest Military had them when I called him.

Bert

Re: Funky Fuel Pump Bolts Needed.....

Posted: Mon Dec 24, 2012 7:37 am
by m-37Bruce
Thanks Bert, Not sure how I missed that note?