Page 1 of 1
adding turn signals
Posted: Sun Mar 09, 2008 9:49 am
by gwalker
Many have asked about adding t/s to their truck, here is a link for the orignal military t/s kit.
http://cgi.ebay.com/ebaymotors/M-Series ... enameZWDVW
Posted: Sun Mar 09, 2008 12:12 pm
by knattrass
You can also get the module, turn signal and harness from Saturn Surplus that is used on the HUMVEE.
Posted: Mon Mar 10, 2008 8:17 am
by gwalker
Yes the one I posted was the first kit the military had an was used until the late 60's when the solid state design came along. That kit does however come w/ the bracket to add the seperate b/o stop light on as well.
Posted: Wed Mar 12, 2008 6:28 am
by knattrass
In the newer version, the flasher module mounts to the left side of the glove box and then the wiring splits are handled with packard connectors in that location. The harness runs from the module, over and up onto the steering column. I had trouble with my harness making the LF, RF, and rears split inside the cab at the glovebox. I ended up re-wiring the whole truck with help from Sid Beck.