Page 1 of 1
Canvas top strap routing
Posted: Sun Nov 11, 2012 4:54 pm
by ZGjethro
Today I noticed that one cab strap wraps around the whole bow, and the other goes just through the fastening slot. Is the correct routing around the whole bow? In the three years I have had the truck, I never noticed the different ways the cab canvas straps were installed
Re: Canvas top strap routing
Posted: Sun Nov 11, 2012 7:16 pm
by m-37Bruce
Should be two loops in the rear, two loops on the windscreen. My pic was too BIG to post, pm me if you want to send it?
Re: Canvas top strap routing
Posted: Sun Nov 11, 2012 9:43 pm
by ZGjethro
Bruce, what I mean is that one strap loops around the bow and goes through the slot. The other one goes from the window frame and only goes through the slot in the bracket. It is a really stupid question, but I cannot seem to find an answer. I spent an hour on google looking at images of M37 tops and I could not find a picture to answer my question.
Re: Canvas top strap routing
Posted: Sun Nov 11, 2012 11:24 pm
by Cal_Gary
I'm confused, but am with Bruce-mine has two brackets at the top of the windshield frame and two footman loops on the bottom of the rear cab bow.
Gary
Re: Canvas top strap routing
Posted: Mon Nov 12, 2012 4:39 am
by m-37Bruce
I thought I could send it thru the pm, but no dice? I did send you a pm w/my email. My top is folded away right now, and my pics a w/o top.
It sounds like you need to weld a "Foot Man Loop" onto your bow frame?
Re: Canvas top strap routing
Posted: Mon Nov 12, 2012 6:11 am
by ZGjethro
I must not be explaining it well. The truck has two strap holes on the windshield frame, and tow on the cab bow. Does the strap wrap around the circumference of the bow, and then go through the slot, or does it go through the slot only, which is on the bottom of the bow? I might need to take a picture to show what I mean
Re: Canvas top strap routing
Posted: Mon Nov 12, 2012 6:52 am
by Rick C
You are explaining fine, I think everyone is assuming you are talking about the strap going thru the loops on opposite ends. Strap should go from windshield...over top of rear bow then thru the footman loop thats welded to the bow.
Rick
I can send you a pic if u send me your email. File too large to post
Re: Canvas top strap routing
Posted: Mon Nov 12, 2012 5:27 pm
by ZGjethro
Thanks Rick. I thought that was the way it went. I am adding an LED strip along the bow as an interior cab light and wrapping the strap around the bow works better for me.
Re: Canvas top strap routing
Posted: Tue Nov 13, 2012 7:46 am
by T. Highway
A little late but I knew I had TB 9-2855-7 and it had good pictures of the Canvas top kit that was removed to install a hard top and winterization kit.
http://g741.org/photogallery/main.php?g ... 932ea8bdc5
Bert
Re: Canvas top strap routing
Posted: Tue Nov 13, 2012 4:30 pm
by ZGjethro
Thanks Bert. That is the way one of my straps are routed, and is opposite the way rick mentioned. Thanks for the photo. I have decided that for my purposes, it does not matter how they are routed. I think I will leave them around the whole bow as I just made them both that way last night.