g741.org

I have a few questions on the battery box that I hope some of you can help me with here.

1.) How is the battery tray attached to the box itself

2.) I am running a 100 amp system. The tray looks too small to hold 2 batteries. I read somewhere that the 100 amp system did not have a battery box. Should I do away with the tray or fabricate a bigger one?

3.) What modern type batteries will fit that tray if any?

Thanks in advance.
Phillip

Phil, my box and tray were bolted together thru the floor.
100 amp systems used a locally fabricated, 6 pages of box, tray plans and a materials list are located here in my Webshots album:

Cant answer your last question, sorry