Page 1 of 1
Dash Knock out
Posted: Fri Aug 10, 2012 2:00 pm
by Rusty1340
Hello,
Can someone tell me what this huge knock out hole is for
The two smaller ones I will weld up
Thanks
Re: Dash Knock out
Posted: Fri Aug 10, 2012 2:32 pm
by WarrenD
That is for the defroster distribution box. Connection comes in from the left front fender (fender mounted heater) to the heater box/diverter and up from there behind the dash, makes the turn thru the dash at that point.
Re: Dash Knock out
Posted: Sat Aug 11, 2012 12:23 pm
by w30bob
I've seen some truck with a speaker mounted there. Or at least a circular wire mesh cover that I assumed was a speaker!
regards,
bob
Re: Dash Knock out
Posted: Sat Aug 11, 2012 3:07 pm
by WarrenD
I'd guess they put a speaker in there to fill the hole.
Re: Dash Knock out
Posted: Sun Aug 12, 2012 9:15 pm
by Cal_Gary
The Ahl Resto guide has a picture of it....
Gary
Re: Dash Knock out
Posted: Wed Aug 15, 2012 9:47 am
by m37jarhead
The large hole in the dash is, as mentioned, for the deforster distribution box.
This subject has been on g741 and has pictures. Try a search and maybe you
can find the pic's. Might clarify what we're talking about.
JB
Re: Dash Knock out
Posted: Wed Aug 15, 2012 5:11 pm
by T. Highway
Rusty,
Here is what bolts up to that knockout.
Bert
