Page 1 of 1
Original Cab holes
Posted: Fri Mar 30, 2012 4:35 am
by Gerry
Does anybody have some pictures showing only the original holes on the cab? I am redoing my cab and want to fill in all the extra holes added over the years. Also I removed the heater and was wondering if vent hole in the dash gets a knockout put back in or was it covered by a panel? It didn't appear to have the indents where it was attached like the hole had on the side of the cab.
Thanks,
Re: Original Cab holes
Posted: Fri Mar 30, 2012 12:41 pm
by xm708
The heater outlet for sure is a knock out. If you put one back in you would probably have to tack it in.
Re: Original Cab holes
Posted: Fri Mar 30, 2012 1:41 pm
by Gerry
Thanks,
Will tack one back in. Did the outer one yesterday just wasn't sure about the dash hole.
Re: Original Cab holes
Posted: Sat Apr 07, 2012 6:56 pm
by Gerry
Still looking for photos of an unmolested cab so I can fill in the non original. If you have some posted in your pics let me know so I can look at them . Cant seem to find a good picture in the manuals of the inside of the cab.
Thanks,