g741.org

I am after the catch assemblies and support arms from a windscreen for the truck project.
I need:
4 Support arms plus the limiters on the center pillar
2 catch handles with mount
2 catch plated (bolted onto the outer windshield frame)
So, has anyone got a rusty frame with all the hardware I desire that they are prepared to part out?
Thanks

Regards - MM

I will look later but I should have all those parts on a parts truck.

Frame is beyond repair but I have most of what you need.

Thanks Guys........
Dicktater, looking at your pics I'd need the outer mounting hardware too, saying that, why would you chop up such a "pristine" windshield .
This is actually for the side windows of my truck so the installation would be a simple one, could you drill the rivets out and the welds that hold the limiters in place or just slice the bits out and I can do all the fiddly stuff here. Better come up with a figure too, can't have you out of pocket for any of your time, effort or goods
Take Care

Best Regards - MM

Monkey Man, To save you some cash and save me a bunch of headache I would prefer to cut all parts with a sawsall or four inch grinder. When you say you need the outer mounting hardware do you mean the windshield pivots that bolt to side of the cab? I have never shipped anything out of Country so I'll need some pointers, shoot me a PM and we can sort this out ...I'm not looking to make any money just compensated for my time!