Page 1 of 2

m37 fender heater instructions/inventory

Posted: Sun Sep 18, 2011 5:38 pm
by xm708
I recently acquired a fender heater in the box but it look as it has been gone through and i can't find the inventory sheet or the instructions? Anybody have a copy or pdf file of it ??

Thanks

ed

Re: m37 fender heater instructions/inventory

Posted: Sun Sep 18, 2011 6:10 pm
by powerwagontim
Ed,
I can photocopy the manual and mail it to you if you like.
Just drop me your address.
Tim

Re: m37 fender heater instructions/inventory

Posted: Sun Sep 18, 2011 7:39 pm
by cuz
You can download a complete PDF copy here free:
http://www.militarytrucks.ca/Files/m37_ ... nstall.pdf

Re: m37 fender heater instructions/inventory

Posted: Sun Sep 18, 2011 11:15 pm
by M37UK
Sorry to butt in but does anyone know if you can still get these heater kits?

Cheers

Re: m37 fender heater instructions/inventory

Posted: Mon Sep 19, 2011 2:42 am
by Murf
Cabel Garbee still has the photos I took of my NOS heater kit for any references you may need here: (my kit is lower on the page under Arctic Heater Kit)
http://www.garbee.net/~cabell/photos6.htm

Re: m37 fender heater instructions/inventory

Posted: Mon Sep 19, 2011 2:49 am
by Murf
M37UK wrote:Sorry to butt in but does anyone know if you can still get these heater kits?

Cheers
As far as I know they are long gone..I have seen some kits that are "piece-mealed" together..but as far as finding the wood crate with the sealed boxes and windshield diffuser intact,,well, good luck. IF one of the companies has one expect to trade your first-born.. The link above shows you everything in the crate in it's original packing....eye candy for the purists :wink:

Re: m37 fender heater instructions/inventory

Posted: Mon Sep 19, 2011 6:27 am
by WarrenD
Great link, my truck has the heater already installed, but it's good to have part numbers and info in the event of repairs.

Re: m37 fender heater instructions/inventory

Posted: Mon Sep 19, 2011 12:13 pm
by Rick C
Midwest Military had heater kits listed on their website...

Re: m37 fender heater instructions/inventory

Posted: Mon Sep 19, 2011 1:24 pm
by xm708
Thanks for all the responses. Cuz I was able to download that thanks alot. Tim I would have taken you up on it but was able to download. I got a kit pretty sure complete with a truckI just got I just do not know if it is 100% complete yet... Thanks again for all the responses.

ed

Re: m37 fender heater instructions/inventory

Posted: Mon Sep 19, 2011 8:03 pm
by cuz
Rick,

I only saw the arctic powerplant heater kits for the engine and batteries on the MWM site.

Re: m37 fender heater instructions/inventory

Posted: Tue Sep 20, 2011 3:45 am
by T. Highway
I know that John @ Midwest Military only had a couple left about a year ago when I bought mine.

Re: m37 fender heater instructions/inventory

Posted: Tue Sep 20, 2011 5:22 am
by Rick C
Sorry, hadn't really checked MWM in a bit since I sold my M37..... Guess theres a bunch of warm happy M37 owners now lol
Rick

Re: m37 fender heater instructions/inventory

Posted: Tue Sep 20, 2011 8:57 am
by vtdeucedriver
Interesting, I will take some pics of the heater I have. Its a Southwind gas fired heater that goes on the left fender. It does not look anything like the ones shown. I also have the instruction manual for the M-37 that goes along with it. Its a pretty big unit. I hope to get it installed over the winter and then I can wear my bermuda shorts while driving it in janurary.

Re: m37 fender heater instructions/inventory

Posted: Tue Sep 20, 2011 8:03 pm
by cuz
The TB listed was for the Hot water Heater Kit. Your Gas Fired Heater Kit has it's own TB and is also a common unit. It pays to do a pressure decay check on those gas fired heaters periodically. Also you should use a Carbon Monoxide warning card or detector in the cab.

Re: m37 fender heater instructions/inventory

Posted: Wed Sep 21, 2011 4:14 am
by xm708
Jeff in Bermuda shorts now there is a scary picture !!