g741.org

Hi Gang,
I need to know the distance between the two well-nuts that mount on the passenger bed side bracket for the deep water fording exhaust. The top well-nut has been ripped out of mine and I am in process of repair, intending to weld the nut to the patch panel, then welding the panel in. Easier this way than patching it first then trying to tack in the well nut from such a confined space....
Thanks in advance,
Gary

Both my beds measured measured 3" but that with bolts installed so this is not an exact measurements C/C .

Thanks Carter! Is that "center to center" (of each well-nut)?
Gary

Didn't remove bolts from well-nuts, just measured center to center of each bolt head and it was 3"

That's just what I needed-thanks again!
Gary

Why I need the measurement:

Gary, It looks like the paint stripper is working rather well.

Yep, it takes a thick coat of gel to really eat it up-that's the Kleen-Strip brand for anyone who may have wondered.
Gary