Page 1 of 1
m37 harness???????
Posted: Sun Jul 24, 2011 4:27 am
by marc8_2
Re: m37 harness???????
Posted: Sun Jul 24, 2011 9:14 am
by cuz
Looks like a post 1955 Greek manufactured harness assy. If you have a -34P for the M37 you can check the ORD PN 8338224 in the numerical index.
Corrected typo.
Re: m37 harness???????
Posted: Sun Jul 24, 2011 10:20 am
by marc8_2
whats a -37p????
Re: m37 harness???????
Posted: Mon Jul 25, 2011 4:05 am
by Cal_Gary
That might be a typo- the reference is actually to check your "34P" or depot-level Parts manual if you have one-it has 10 times the info found in the "20P" manual.
Gary
Re: m37 harness???????
Posted: Mon Jul 25, 2011 6:29 pm
by marc8_2
couldn't find anything with the books i have
Re: m37 harness???????
Posted: Sun Apr 22, 2012 4:46 am
by marc8_2
Anybody know what this wiring harness go for before i cut it up to make a harness
Re: m37 harness???????
Posted: Sun Apr 22, 2012 6:40 am
by m-37Bruce
I'll check my fed catalog for you, before lunch today.
Re: m37 harness???????
Posted: Sun Apr 22, 2012 7:43 am
by m-37Bruce
Well I came up with nuthin', none of the #'s matched anything I have, from 1/4 ton (m-38), early 3/4 ton as well as g-741 thru 10 ton no matches! That doesn't mean it ain't right, does the harness have cannon plugs on either end, are there two separate pieces, front & rear?
Re: m37 harness???????
Posted: Sun Apr 22, 2012 8:22 am
by BILL L
Best I can find out is it is a control assembly harness made by the General Motors Corp.
Re: m37 harness???????
Posted: Mon Apr 23, 2012 7:08 pm
by marc8_2
I can't put up the pictures as there to big.there 2 3female pin connectors, 1 6male pin connector, 1 14 female pin connector, 1 4female connector and 7 douglas single connectors. pictures is from the same harness
Ya i come up with the same thing BILL.
