data plate
Posted: Sat Jan 19, 2008 12:15 pm
is there a data plate for above the hand throttle? there are 2 screw holes
Page 1 of 1
Posted: Sat Jan 19, 2008 1:39 pm
There is, it reads something like: pull out throttle before fording, so it may have been part of the fording kit I dont recall.
Posted: Sat Jan 19, 2008 3:11 pm
well if anyone has 1 let me know please 
Posted: Sat Jan 19, 2008 4:42 pm
"PULL OUT THROTTLE
WHEN FORDING"
I have ordered a full M37 kit from VPW based on referral from MW. My old says it in all cap.
WHEN FORDING"
I have ordered a full M37 kit from VPW based on referral from MW. My old says it in all cap.
Posted: Fri Feb 22, 2008 6:43 am
ok , what data plate goes above the cold engine hand primer to the left of the colum?
Posted: Fri Feb 22, 2008 8:53 am
I believe the data plate above the primer handle references the operation of the winch - no winch- no plate.
OR...
Posted: Fri Feb 22, 2008 9:24 am
If you mean just above and slightly to the left of the engine primer knob, that is the Publications data plate.
TM 9-8030, Paragraph 7. Data, Caution, and Instruction Plates lists these. Often the important safety warnings are covered up or are gone. It's good to know them.
TM 9-8030, Paragraph 7. Data, Caution, and Instruction Plates lists these. Often the important safety warnings are covered up or are gone. It's good to know them.
Posted: Fri Feb 22, 2008 9:42 am
got the publication one, it must be the winch plate, looks like it is large, just wasn't sure if there was 1 for the primer pump