Page 1 of 1
Wheel cylinders
Posted: Tue Aug 03, 2010 6:05 pm
by slk
Are the wheel cylinders for the brakes the same front and back on the M37. I do know there is a right and left for the front but is the back the same part numbers?
Thanks
Steve
Re: Wheel cylinders
Posted: Tue Aug 03, 2010 6:15 pm
by cuz
Same. 2 left and 2 right.
Re: Wheel cylinders
Posted: Tue Aug 03, 2010 7:32 pm
by slk
Thanks......... I have replaced the front 2. The right front was frozen up and not working at all. I now have pretty good brakes. I think I will replace the rears just for good measure.
Steve
Re: Wheel cylinders
Posted: Sat Aug 07, 2010 11:23 am
by JBizal
Wheel cylinders are step bored. 1.375 on one side, 1.250 on the other. Always install them Big Bore Back.
John