g741.org

While taking the wiring out, I had to pull my distributor in order to access the "Modification" I had made on the RF filter a while back. Doing so was all it wrote for the gasket on the distributor. Is there an O ring or an easy replacement short of cutting a new gasket from cork? I will have to go get the cork tommorow but was wondering if there was something else ?

Thanks again Gang!!!

If you make a gasket you want to try and make it the same thickness as the cork is or you might end up with too much preload on the oil pump,but a good paper gasket material shold work just fine.
hb