g741.org

Posted: **Sun Jan 06, 2008 1:31 pm**

[URL=http://good-times.webshots.com/pho ... .jpg[/img]
Front Valence[/url]

Posted: **Sun Jan 06, 2008 1:32 pm**

[URL=http://good-times.webshots.com/pho ... .jpg[/img]
Drill out.[/url][URL=http://good-times.webshots.com/pho ... .jpg[/img][/url]

Posted: **Sun Jan 06, 2008 1:36 pm**

[URL=http://good-times.webshots.com/pho ... .jpg[/img]
Good Threads?[/url]

Posted: **Sun Jan 06, 2008 4:06 pm**

Damn Bruce
I don't envy what your doing, My body bolts came off ok but I had to use a die grinder to get the truss bolts off my bed/sill panels. My #1 bed sill was rotted out also ( as most are).
Bill W

Posted: **Sun Jan 06, 2008 5:27 pm**

I thought I noticed a new handle on your moniker? Hey Bill, How it going, everything well in the great state of Gaw-Ja?
This bed is a bit more than I was bargaining for!

Posted: **Sun Jan 06, 2008 6:37 pm**

M-Thrax wrote:Damn Bruce
I don't envy what your doing, My body bolts came off ok but I had to use a die grinder to get the truss bolts off my bed/sill panels. My #1 bed sill was rotted out also ( as most are).
Bill W

Hey Again Bill,
Do the bed & bed sides (at the tailgate hinge) have "L" brackets on the interior (across & upright)?

Posted: **Sun Jan 06, 2008 7:52 pm**

Yes there is a threaded L-bracket on each side of the bed, I had to fab one for my truck but was able to re use the other

Posted: **Mon Jan 07, 2008 3:53 am**

M-Thrax wrote:Yes there is a threaded L-bracket on each side of the bed, I had to fab one for my truck but was able to re use the other

Morning Bill,
I might have to do the same? I have no plans to take the other bed apart, it should be able to find another home?

g741.org

Bed Progress

Bed Progress

Nuther One

Last One 4 A While

M-Thrax

Rear Bed ?