Page 1 of 1
Passenger side mirror-how to hang it?
Posted: Mon Jan 25, 2010 12:51 pm
by Cal_Gary
I hate not having a passenger side mirror on my M37. The standard mount doesn't work if you have the jerry can affixed. I've seen mods to the hood support, brackets attached to the side access panel and such, but none look very "clean" from an appearance perspective-they appear uneven, off-centered and such. We don't dare run w/o a spare can of gas....
Opinions please-what's your best solution for this while retaining the spare gas can?
Thanks,
Gary
Posted: Mon Jan 25, 2010 1:20 pm
by Chunk
Here's how mine mounts. Solid too. I'm going to be making some copies of these too.
Posted: Mon Jan 25, 2010 2:37 pm
by Carter
The one I made and installed is nearly the same as Chunks, there are several shots of it in this album.
http://news.webshots.com/album/247061965WWtrqv?start=96
Click on thumbnail for larger view.
Posted: Mon Jan 25, 2010 6:49 pm
by Jim Branson
I got mine from John at Midwest. It worked just fine!
Posted: Tue Jan 26, 2010 12:48 pm
by Cal_Gary
Thanks for the shots, guys (even though some of them don't open from work-firewall issues). I now see how best to proceed.
Gary
Posted: Tue Jan 26, 2010 1:07 pm
by W_A_Watson_II
I fabricated my own, similar to Carter's.
Posted: Tue Jan 26, 2010 3:05 pm
by Josh
mine is very similar to the others, but I don't have any pictures of it.
Mirror Bracket
Posted: Wed Jan 27, 2010 4:01 pm
by Jess
The one in the pics Chunk posted looks like the stock Canadian passenger side mirror mount. As also mentioned, John Bizal has exact duplicates available.
Jess
Re: Mirror Bracket
Posted: Wed Jan 27, 2010 7:27 pm
by Chunk
Jess wrote: John Bizal has exact duplicates available.
Jess
How much?
Reproduction Mirror Bracket
Posted: Thu Jan 28, 2010 1:25 pm
by Jess
Chunk: You can check John's web site.
www.midwestmil.com I think it was $34 with the mirror arm last time I looked. He has a lot of other good stuff we all need sooner or later...
Jess