Page 1 of 1
Need a mirror
Posted: Wed Nov 11, 2009 5:56 pm
by Wes
While I was working in the shop I broke one of my mirrors. I'm looking for a replacement, its a rectangular "Yankee".
Posted: Thu Nov 12, 2009 2:33 am
by HingsingM37
If you do not want the mil-spec OEM, I used a generic rectangular pair from Advanced Auto Parts and painted them. It was about $12 for the pair. You can see it in this photo:
http://www.g741.org/photogallery/main.p ... temId=5681
Most of the vendors have the round replacments, you will have to look around if you want the OEM
Posted: Sat Nov 14, 2009 5:33 am
by Brett
If you just broke the glass in it any automotive glass shop should be able to cut you a new one and replace it in just a couple of minutes.
Brett
Cut one myself thanks
Posted: Sat Nov 14, 2009 6:37 am
by Wes
I felt that for what I originally paid, replacing the whole unit would be cheepest, but these original Yankee brand rectangle mirrors are hard to find. I wanted the mirrors to match, so I went to a frame shop my friend owns and got some scrap mirror. I cut it myseft and glued it in. Not perfect but looks pretty good.