Page 1 of 1
Ok gentlemen...Transfercase seal questions....
Posted: Fri Jun 19, 2009 6:42 am
by Chunk
I'm still running NOS garloc military seals in my transfercase. Not the greatest due to they're age and time sitting on a shelf. What I'd like to know is,...Does anybody have part numbers for newer,latest greatest,updated seals that would be available at NAPA,Orielly's,kragen,etc,etc parts houses? I'm going to replace input/output shaft seals,and shifter shaft seals. Thanks again in advance for any help. Joe
Posted: Fri Jun 19, 2009 12:47 pm
by Cal_Gary
I don't have numbers, but got all the neoprene seals from VPW.
Gary
Re: Ok gentlemen...Transfercase seal questions....
Posted: Sat Jun 20, 2009 8:10 am
by MSeriesRebuild
Chunk wrote:I'm still running NOS garloc military seals in my transfercase. Not the greatest due to they're age and time sitting on a shelf. What I'd like to know is,...Does anybody have part numbers for newer,latest greatest,updated seals that would be available at NAPA,Orielly's,kragen,etc,etc parts houses? I'm going to replace input/output shaft seals,and shifter shaft seals. Thanks again in advance for any help. Joe
Seal#'s, National 410308, takes 4.
Shift shaft seals, 470954, takes 2.
Redi-sleeves, 99212, takes 4.
Available through any parts source or bearing supplier.
thanks for the parts numbers
Posted: Mon Jun 22, 2009 12:58 pm
by mannyc1
nice to see a vendor provide useful info and local sourcing. it is that type of help that makes you an asset to rely on when there is a large project to undertake. the other guys nickel and dime you to death, marking up napa items and claim that they are hard to get. Thanks!!!