Page 1 of 1
Shocks
Posted: Mon Jun 08, 2009 4:00 pm
by Gerry
I need to check my shocks to know if they are good. How much resistance should there be when pushing and pulling on them?
Thanks,
Re: Shocks
Posted: Thu Jun 11, 2009 8:24 am
by MSeriesRebuild
Gerry wrote:I need to check my shocks to know if they are good. How much resistance should there be when pushing and pulling on them?
Thanks,
If they have been there many years like most have, no need to worry about checking, just replace.
Posted: Thu Jun 11, 2009 8:41 am
by Gerry
Charles,
Your probalbly right just NOS are very expensive so I would have to use regular, but not many people will notice.
Thanks,
Posted: Thu Jun 11, 2009 8:59 am
by MSeriesRebuild
Gerry wrote:Charles,
Your probalbly right just NOS are very expensive so I would have to use regular, but not many people will notice.
Thanks,
NOS would be the worst thing you could buy at any price, total junk. They would be leaking fluid & worthless before you got them on good. We have some nice new current production shocks for under $50 each.
Posted: Thu Jun 11, 2009 3:36 pm
by Lifer
Like Charles said, NOS = worse than useless. Go with new "modern" shocks and paint them OD if you're concerned with appearance.
Posted: Thu Jun 11, 2009 7:23 pm
by Gerry
Thanks all,
I will by some from Charles