Page 3 of 3
Re: FIRST AID KIT
Posted: Sat Sep 04, 2010 9:02 am
by Paddyofurniture
Sal,
The bumpers on the side of the seat and the bumpers on the floor look to be the same size.
The bumpers snap in to the hole and have a little "tail" , cone shaped sticking through.
Paddy
Re: FIRST AID KIT
Posted: Sat Sep 04, 2010 6:14 pm
by Sal
Thanks Paddy
Sal
Re: FIRST AID KIT
Posted: Sun Sep 05, 2010 4:59 am
by Paddyofurniture
Anytime Brother Sal.
Re: FIRST AID KIT
Posted: Sun Sep 05, 2010 5:01 am
by mike_l
Paddy,
In response to this thread and to the Swap Meet thread: "Is this a one piece or two piece strap?"
It was a one piece that originally passed through the seat box slots cut into the early trucks (we already knew that). I did a search on the FSN (added 5330- to the PN listed in the ORD 9 manual) and was directed to a NSN (5340-00-678-9031) for a nylon replacement strap that is 1" x 18". I don't have a 1st aid kit there so I can't say for sure it is correct size but it sounds about right in length.
Re: FIRST AID KIT
Posted: Sun Sep 05, 2010 5:49 am
by Paddyofurniture
Thanks Brother Mike.
The 18 inch length sounds right.
I will put my first aid kit in place and measure the strap length.
Paddy