Page 2 of 2
Re: Lack of Power Under Load
Posted: Mon Oct 05, 2020 6:03 am
by vit16
Ok thank you!!
so what could have caused my coil to blow?
as you described, the engine will not have power at high rpm, it will die until iddle and I feel its electrical.
I will be working on many points, imagine this engine was 8 years stopped so i will be slowly diagnosing and fixing.
Ronnie
Re: Lack of Power Under Load
Posted: Mon Oct 05, 2020 11:12 am
by vit16
Maybe an original 24v coil is designed to isolate 24v+ so it will work better on a 6v installation. Maybe
12v designed coils will not hold 24v regarding isolation. That might be the cause of my blown coil.
Another thing could be the 100v measured at the battery connections. I have to solve that.
Re: Lack of Power Under Load
Posted: Mon Nov 16, 2020 1:51 pm
by John Mc
Peter Debella of
Debella Jeep Parts contracted with a manufacturer to make a run of new, quality
24V coils that will fit an M37. It's listed as an M38 & M38A1 24 Volt Ignition Coil, but will also fit an M37. They are in stock now, and going for $55 + shipping.
Re: Lack of Power Under Load
Posted: Mon Nov 16, 2020 3:32 pm
by milstencil
This was posted on the M151 page:
https://youtu.be/4pSG_X1lZ5c
might want to watch the video in full!
Re: Lack of Power Under Load
Posted: Mon Nov 16, 2020 4:43 pm
by John Mc
Well, that's a bummer! Do you know if that's a Debella Jeep Parts coil? I just ordered one.
Re: Lack of Power Under Load
Posted: Mon Nov 16, 2020 5:27 pm
by milstencil
I think he said "one of the new black" coils.
Watch the video again.
I think the whole series of posts on the subject of coils has to be read:
http://g838.org/viewtopic.php?f=2&t=12808
We should change the topic title to COILS
Re: Lack of Power Under Load
Posted: Sun Apr 25, 2021 1:09 pm
by PoW
The imported chrome-plated coils are notoriously bad.
PoW